Notes Checking this is about as hard as putting air in your tires. Tools Needed:
1) Some of the components of the emission control system. Carefully remove the cap on the EGR vacuum modulator. You might have to use a thin flat head screwdriver to pry the cap off. 2) Here you can see a fairly dirty EGR vacuum modulator filter. I used small screwdriver to pull the filter out. 2) Blow the dust and dirt out of the filter holder. Use compressed air to clean the dust out of the filter. Replace the filter if needed with a equivalent type of material. Lexus does not sell the filter alone. The only way to get a new filter from Lexus is to buy an entire now vacuum modulator assembly. 3) Put the filter back in and pop the cover back on.
Dirty EGR?
Submitted by xxx@******.com Revision 0 Article submitted on 3 Sep 2010 Last modified on 12 Sep 2010 Viewed 5112 times |
|