This is a simple one but it's not so obvious. If your mirror is broken or it doesn't work properly you have to replace the entire mirror. Tools Needed:
1) Remove the center visor using a thin flat head screwdriver. It's just clipped on there. Hint: Put some tape on the screwdriver so you don't scratch the plastic. 2) Remove the two screws that hold on the mirror using a screwdriver. 3) Disconnect the inner rear view mirror connector. Submitted by xxx@******.com Revision 1 Article submitted on 11 Sep 2010 Last modified on 2 Mar 2011 Viewed 3849 times |
|