Strict Standards: Only variables should be passed by reference in /home/icydesig/web/diy.icydesigns.com/public_html/readarticle.php on line 116

Strict Standards: Only variables should be passed by reference in /home/icydesig/web/diy.icydesigns.com/public_html/readarticle.php on line 116


From : Greg at Chrysler

The front fender is not that bad to remove. First, remove the front bumper fascia: remove the screws in the ends of the fascia & undo the bolts that hold the bottom of the fascia to the bumper beam. Two of the bolts are actually on the back of the fascia -- you have to reach up (while lying on your back) under the bumper and undo these bolts, which secure black plastic fascia straps to the steel bumper beam.

Once the fascia has been slid off, you can reach all of the bolts for the headlight assembly. One of the headlight bolts cannot be reached with the fascia in place. One of the fender bolts cannot be reached with the headlight in place. You have to pop out the plastic fender liner to reach the fender bolt that is near the door. Remember that there are also 2 bolts at the bottom edge of the fender near the door.

Greg Smith

0 total comments, spanning 0 pages.
Showing 0 to 0
Sign in to make a comment.


Submitted by xxx@******.com

Revision 0
Article submitted on 2 Mar 2015
Viewed 1040 times

Please enable / Bitte aktiviere JavaScript!
Veuillez activer / Por favor activa el Javascript![ ? ]