Remove the 3 bolts holding down the Intercooler and also remove the air hose clamps.

You may have to drain the intercooler if you cannot move it aside but I was lucky enough to be able to just move it aside.


Then remove the vac hose.

Remove the two 10mm bolts holding this plastic cover down

Remove the three 10mm bolts holding down the spark plug wires


And pull out the plugs and this is what you end up with..


Now use your spark plug socket (with probably an extention) and take out the four plugs and replace them as you wish.

Installation is the reverse of this procedure.

Submitted by xxx@******.com

Revision 0
Article submitted on 26 Apr 2010
Last modified on 26 Apr 2010
Viewed 6211 times