1
Pull the windshield wiper arm away from the windshield to its fully extended position. The wiper arm will not fall over when it is fully extended.
2
Pull up on the locking clip located in the middle of the blade assembly to release the blade assembly from the wiper arm. The clip will remain up when it is moved.
3
Push the blade assembly toward the windshield to remove it from the wiper arm. Discard the old blade assembly.
4
Slide the new blade assembly onto the wiper arm and press down on the locking clip to secure the assembly to the arm.
5
Push the wiper arm down onto the windshield.
6
Repeat Steps 1 through 5 with the remaining windshield wiper.