This diy is for you lazy bums that dont wanna take off your caliper to paint it.
Tools needed:
Wire brush
Flat head screw driver
News Paper and tape
500' engine enamal
rattle can primer
and all the tools in here (just kidding)
this part is key, make sure you really get the calipers clean and no rust on them at all.
Tape off the caliper really well so that no paint gets on the rotors
Tuck the newspaper under the caliper really well to prevent any spray from getting on the rotors.
Prime the caliper, dont worry if the first coat dosnet look thick, you going to want to do about 2-3 thin coats of primer.
Put on about 4 coats of the engine paint or keep applying untill you get the shade your looking for.
DIY lazy way of painting your calipers without removing
Submitted by xxx@******.com
Revision 0
Article submitted on 4 Jul 2013
Viewed 3354 times
DIY Guides
Manuals
Articles
